Skip to main content
615 Vents, dryer vent and air duct cleaning in Nashville TN 615-431-3789

Dryer Vent Services

Dryer vent rerouting and shortening that gives your dryer a shorter, straighter path outdoors

We redesign a long, bent or poorly placed dryer vent so hot air leaves quickly and lint has fewer places to collect.

Call or text today615-431-3789

Request a site visit

Tell us about your project. We will contact you to confirm the details and set up a time to visit.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Dryer Vent Rerouting & Shortening

The longer a dryer vent is, and the more elbows it has, the harder the dryer has to work. Many homes have vents that snake up through a floor, across an attic and out a roof, or that make several turns behind a wall because that was the easiest way to install them. Those vents clog quickly and are the ones most likely to give trouble.

We look for a better path: through the nearest outside wall, straight down into a crawl space exit or along a shorter route to the roof. We measure the length, count the bends and plan a run that stays within the dryer maker's limits, then install smooth metal duct, a proper wall or roof cap and a good seal where the duct passes through the building. In a Nashville townhome or a house with an interior laundry room, a new route can be the difference between a dryer that struggles and one that works.

What you get

Done right, from the first walk-through

01

Route planning

We measure and plan the shortest practical path with the fewest bends.

02

Smooth metal duct

Rigid metal duct is used for the new run.

03

New termination

A correct wall or roof cap with a working damper.

04

Sealed penetrations

Openings through walls and roofs are sealed against weather and pests.

The process

How your service comes together

  1. 1

    Measure and plan

    We trace the old run and plan a shorter, straighter one.

  2. 2

    Install the new run

    We install the duct, the clamps and the new outside cap and seal the openings.

  3. 3

    Test and remove the old run

    We check the airflow and cap off or remove the old duct.

FAQ

Common questions about rerouting & shortening

Can any dryer vent be shortened?

Often, yes. We look at where the dryer sits and where an outside wall or roof is, and we suggest the most practical route the house allows.

Is a roof exit okay for a dryer vent?

It can work with the right cap, but it is usually a longer run. When a wall exit is possible, it is typically easier to keep clean.

Will rerouting affect my walls?

We aim for small openings and tidy repairs, and we explain the plan before we cut anything.

Let us help with your rerouting & shortening

Call, text or send the form. Tell us about the home or building, what you have noticed and what you would like, and we will take it from there.

615-431-3789Text